ZH
产品描述
Metallic Epoxy Flooring
Scope of Application
1.Suitable for floors requiring wear resistance, chemical corrosion resistance, pressure resistance, as well as aesthetic and environmental performance.
2.Suitable for floors in offices, exhibition halls, and walkways of public buildings, commercial floors, and landmark projects.
3.Suitable for indoor floors in hospitals, exhibition halls, shopping malls, schools, underground parking garages, supermarkets, large retail stores, etc.
Coating Properties
·Seamless and easy to clean
·Durable, mold-resistant and corrosion-resistant
·Customizable design, low maintenance cost
·Pressure and impact resistant
Coating Structure:
Technical Indicators
All tests (except drying time) need to be performed after 7 days of curing at 25°C.
Experimental Items | Unit | Indicator |
Fire resistance | (GB/T 5544) | A1F1 |
Compressive strength | Mpa | 86 |
Flexural strength | Mpa | 22.1 |
Tensile strength | Mpa | >13 Mpa (mixed material, 7d/+23°C) |
Tensile bond strength (dry) | Mpa | 3.32 Mpa (base material internal failure) |
Tensile bond strength (wet) | Mpa | 2.18 Mpa (base material internal failure) |
Shore hardness | D | 95 |
Impact resistance (Grade II) | 1000g steel ball, dropped from a height of 100cm, with no cracks or peeling on the coating | |
Abrasion resistance | 750g/500r | 0.017g |
High temperature resistance | Withstands continuous high temperature up to 60°C | |
Slip resistance | Dry friction coefficient | 0.68 |
Water absorption | (SN/T 0308-93) | No significant change |
Construction Procedures
Coating thickness: Generally 1mm-3mm; re-sanding is required if exceeding 2mm.
The floor can be walked on after 24 hours and subjected to heavy loads after 72 hours of construction. (Based on 25°C; the opening time should be extended moderately at low temperatures.)
Crack-resistant leveling layer---- Apply base coat----Lay fiberglass mesh----Apply flexible membrane----Fix dividing strips----Material mixing----Paving operation----Grouting----Rough grinding----Repair----Fine grinding----Repair----Top coating
技术参数
| 项目 | 数值 |
|---|---|
| 防火性能 | (GB/T 5544) · A1F1 |
| 抗压强度 | Mpa · 86 |
| 抗折强度 | Mpa · 22.1 |
| 拉伸强度 | Mpa · >13 Mpa (mixed material, 7d/+23°C) |
| 粘结强度(dry) | Mpa · 3.32 Mpa (base material internal failure) |
| 粘结强度(wet) | Mpa · 2.18 Mpa (base material internal failure) |
| 邵氏硬度 | D · 95 |
| 耐冲击性(Grade II) | 1000g steel ball, dropped from a height of 100cm, with no cracks or peeling on the coating |
| 耐磨性 | 750g/500r · 0.017g |
| High temperature resistance | Withstands continuous high temperature up to 60°C |
| 防滑性 | Dry friction coefficient · 0.68 |
| 吸水率 | (SN/T 0308-93) · No significant change |
